Release Date: 19 November 2019

Important Notes

  • Please make sure you read ALL of the information below before installing the software on your device.
  • Please install and test the software in your environment before mass deployment.
  • We encourage you to read and follow our security advisories.
  • This release does NOT directly include the OpenVPN feature in firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.

Clarification regarding the pullback of Release 10.1.46.15

Please be informed that we had to pull back the former Release 10.1.46.15 because of the blocking issue:

SAP-4288: The phone crashed when the monitored phone held the call #Asterisk

which is corrected with this Release 10.1.46.16 here (listed under corrections below)

Known issues and limitations:

SAP-3756: In a certain multicast scenario when a caller (B) is accepted by a phone (A) that receives already a multicast page, the caller cannot hear the audio from callee (A). This issue is isolated to D717, D735 & D335.

→ No workaround

SAP-3996: Support for Snom DECT dongle A230 is broken, - connected headsets Snom A150, A170, A171 or the DECT speaker Snom C52-SP do not work

→ No workaround, but we can provide a hotfix version with the required correction but for verification only (productive use is not supported) via ticket request in Snom support helpdesk

SAP-4089: If context-sensitive key gui_fkey4 is configured with an XML definition and user attempts to open Settings → Information → Status Info it can take about 4 seconds to show the info screen (takes a max. of 1 second normally).

→ No workaround, but we can provide a hotfix version with the required correction but for verification only (productive use is not supported) via ticket request in Snom support helpdesk

SAP-4231: Support for DHCP option 125 is broken

→ Workaround: we recommend using DHCP option 43 if possible as an alternative

Note: We can provide a hotfix version with the required correction but for verification only (productive use is not supported) via ticket request in Snom support helpdesk

SAP-4239: The setting transfer_dialing_on_transfer is not effective anymore. Even if set to attended the transfer performed will be a blind transfer

→ Workaround: we recommend using the new context-sensitive key "Attended" to perform an attended transfer, please see SAP-3692 listed in New features below.

Error rendering macro 'wiki-markup'

org/apache/commons/lang/StringUtils


Error rendering macro 'wiki-markup'

org/apache/commons/lang/StringUtils