M500

Web User Interface

System→ Alarm → M56 Handset → Intercom Call Alarm Recipient 

Phone User Interface

N/A

Initial Firmware Version

1.14.4 

Text Configuration

alarm.cordless.x.intercom = VALIDVALUE

Description

Sets the device number the M56 handset will intercom call when the alarm is signaled. Used when alarm.x.signal is set to "intercom". 

where x = Device number (1-48)

Note: The M500 supports a maximum of 16 devices in dual cell mode. 

Valid Values

1-48

Default Value

1