Release Date: 15. December 2023

This version has received a maintenance update with the version 10.1.169.15!

Important Notes

  • Please make sure you read ALL of the information below before installing the software on your device.
  • Please install and test the software in your environment before mass deployment.
  • We encourage you to read and follow our security advisories.
  • This release does NOT directly include the OpenVPN feature in the firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.
  • The models D345, D712, D725 are End of Sale (EOS) according to Snom Product Lifecycle and tested automatically. Please check out the Snom PLC for corresponding replacements!

Warning

The parameter user_active accepts only on and off, according to TR-114 parameter table. A provisioning from any other value is converted to off and the identity will be deactivated. Before upgrading, please check your TR-069 settings.

NOTE:

For the new D8xx series, starting with D862 and D865 this is our 5th. Release deprecating the initial, second, third, and 4th one. Please note: As the D8xx series is based on a substantially modernized software/software architecture you may find limitations & functional gaps compared to D3xx & D7xx series. The severity of such depends on the scope and complexity of your specific PBX solution. But no worries, if you find your solution not yet fully supported as known from D3xx & D7xx: By upcoming development we will not only strive to close such potential gaps in comparison to D3xx & D7xx series ASAP, but even surpass these series in the future. Please make sure you review the known issues and limitations section below and see our PBX Partner overview in regards of D8xx series interoperability scope.

This Release is also the second one officially supporting the recently launched entry-level models D140 and D150.

                                         


You will find a great start line in these D8xx Instructions. For additional information, datasheets, and how-to's please visit the product-specific sites for D862 and D865.

Known issues and limitations:

SAP-6326: The new WUI, web user interface is far advanced, esp. technically compared to D3xx & D7xx but does not yet support the entire scope of options & features known from its predecessor @D8xx series

→ Workaround: You can still access the predecessor web interface via http:// IP address of the phone:3112 (please note the http instead of http*s* and the port 3112) Please check the current value of setting: webservertype to be set to http_https or http for this workaround.

XQI-4743: Snom D865 / D862 re-invite after refer when performing a transfer. This can cause problems especially when phones of different brands are part of the blind transfer scenario. Currently no workaround. The bug will fixed as soon as possible and an update will be provided.

D86x supports now multiple headsets with USB connection. Some Bluetooth headsets, however needs to be still tested and configured.

→ No workaround.

Error rendering macro 'wiki-markup'

org/apache/commons/lang/StringUtils


Error rendering macro 'wiki-markup'

org/apache/commons/lang/StringUtils