Content
Release Date:Â 1. September 2020
Important Notes
- Please make sure you read ALL of the information below before installing the software on your device.
- Please install and test the software in your environment before mass deployment.
- We encourage you to read and follow our security advisories.
- This release does NOT directly include the OpenVPN feature in firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.
Clarification regarding the pullback of Release 10.1.57.13
Please be informed that we had to pull back the former Release 10.1.57.13 because of the blocking issue:
SAP-5275: On dialpad keypress events the DTMF tone play (DTMF echo) was erroneously applied to all tone_scheme, affecting: Austria, France, Germany, Norway, Spain, Sweden, Switzerland
which is corrected with this Release 10.1.57.14 here (listed under corrections below)
Known issues and limitations:
SAP-3756: In a certain multicast scenario when a caller (B) is accepted by a phone (A) that receives already a multicast page, the caller cannot hear the audio from callee (A). This issue is isolated to D717, D735 & D335.
→ No workaround
SAP-4680: For refactoring purposes the maximum amount of entries in the local phone book is temporarily reduced from 2000 to 1000 @D715 @D717 D725 @D735
→ No workaround. Please make sure that you do not use this version if you need > 1000 local phone book entries with the affected models.
SAP-4459: If an Action URL is configured for an phone-book contact that contains e.g.: /nphMotionJpeg?Resolution=640x480#mjpg the action is triggered, but the phone sends a malformed request, - which partially defects e.g. MJPEG door-phone integration
→ No workaround, except configuring the URL on an fkey and manually request the MJPEG from the door-phone with key press
Note: Integrations where the Action URL does end with a plain text e.g. /snoma.cgi as described in Automatic view Door Camera on Doorbell ringing are not affected
SAP-5309: The D120 is not supported with this release. With respect of an essential part our quality policy we always strive to ensure full level of downgrade-ability and backward-compatibility. By this, it was identified that due to its extremely limited HW resources the D120 cannot comply to this high standard as the other deskphone models. At least not without additional development efforts. Therefore the version 10.1.57.13 was not generated for it.
→ No workaround. Please continue using the release before: 10.1.54.13 Release
Note: We strive to resume the continuous firmware support of the D120, so that future release will cover it. The topic is already in our records under the reference number above (SAP-5309).
Overview
Content Tools
