Content
Release Date: 21. June 2022
Important Notes
- Please make sure you read ALL of the information below before installing the software on your device.
- Please install and test the software in your environment before mass deployment.
- We encourage you to read and follow our security advisories.
- This release does NOT directly include the OpenVPN feature in the firmware file anymore. If you wish to use this feature please make sure to download and install the VPN feature.
- The models D345 and D725 are End of Sale (EOS) according to Snom Product Lifecycle and tested automatically. Please check out the Snom PLC for corresponding replacements!
Important advice regarding upcoming hardware revisions of D717 & D735 (new LCD's) and the D385N & D785N variants (without Bluetooth support)
The phone models D717 and D735 will get new LCDs in an upcoming hardware revision. This release here is the third public available firmware that supports the new hardware revision and all the previous ones. But to prevent the new revision from being potentially bricked by downgrade attempts to older firmware releases, we introduced a compatibility check in the firmware update process (see SAP-6152 at 10.1.84.12 Release). In addition, new settings / setting values are integrated in this release here to facilitate identifying the new hardware revision to support e.g. it's handling in provisioning or other related maintenance-, inventory- management tasks.
- a new setting hardware_version
- the value of hardware_version is shown in WUI (web user interface) section System Information /info.htm and PUI System Info screen
- a new "X-snom-" custom HTTP header is added providing the value of setting hardware_version in phone web requests (e.g. provisioning data requests)
The new phone models D385N and D785N are basically HW revisions of D385 and D785 without the Bluetooth chip. Same downgrade / potential brick protections as for D717/D735 new HW do apply. The recently introduced compatibility check in the firmware update process is now extended to this revisions.
Known issues and limitations:
SAP-5625: The MJPEG support (e.g. for door phone integration) is limited to work correctly only in idle state, but not in Ringing or Connected, - the issue is under investigation.
→ No workaround. Please make sure that you do not use this version if you need MJPEG support for Ringing and/or Connected state
SAP-5942: Due to a regression the setting rtp_early_media_muted is broken, - no local ringback with early media. Related log statement: "[DEBUG0] MEDIA: RTP: no incoming early media packets, play ringtone instead".
→ No workaround, but a known last known good with 10.1.37.11
SAP-6888: Due to the local phone book refactoring, the .csv file based import of contact entries via WUI, web user interface does not work or fails if entries are assigned to groups (like VIP, Favorite, Deny List), or have multiple numbers / sub-contacts (related: XQI-1380, XQI-1406)
→ No workaround.
XQI-1496: Due to the local phone book refactoring, the sorted view does place contact entries that have first or last name starting with a number (e.g. 7crown) at the end of the list (instead of starting with such entries)
→ No workaround.