I'm using IP Phone D862 provisioned with easybell. My problem is that many calls do abort after a short time. I've got a qualified answer from easybell support that the phone doesn't respond to "200 ok". The recommendation was to set "Use outbound" at SIP/RP → Advanced settings. Unfortunately I cannot find the setting because it seems that the legacy http port 3112 Web Interface (http://local-IP:3112) doesn't work anymore with the last FW releases FW My phone is on the latest snomD862-SIP 10.1.169.13. The only option seems to be the Phone Manager. Even if I look at the "list of all settings" I cannot identify this option. Help would be much appreciated.

profilePicture

Andreas Uhr

$userLabel.Name

Joined: 03.04.2023

2 Comments

  1. Gianmaria Tononi

    Jan 26, 2024

    Hi,

    On our latest D8xx firmware, HTTPS is the default protocol for the web interface, so connection to the "old" one doesn't work automatically

    To access the old WUI you need to modify webserver_type from "https" to "http_https", reboot the phone and the old WUI will be available at http://phone_IP:3112

    You can change the offer_outbound and enable it anyway also from the new phone manager, you need to get into the Maintenance→Settings List menu, in there you can search for offer_outbound and modify it directly (this can be done with every parameter if not set as read-only)

    Thank you


  2. Andreas Uhr

    Jan 26, 2024

    Thank you for you prompt answer. It helped a lot. Problem solved!