To add and register a Snom phone to an innovaphone PBX is very easy. The PhoneLink for innovaphone app acts as a bridge between the PBX and Snom's cloud provisioning service SRAPS.
The PBX will automatically pass on all required settings to the PhoneLink for innovaphone app.
After you have followed these steps, the phones will be successfully registered to the  innovaphone PBX  and ready to make and receive calls.  

1. Creating a new provisioning profile

SRAPS provisioning profiles are very useful to store setting parameters that apply to a group of phones, e.g. UI language, time zone, ring tone, admin password, etc.

We will also use SRAPS provisioning profiles to personalize outbound proxy settings (important to distinguish between on-premise and cloud PBX installations)

To create a new provisioning profile, log in to the SRAPS web portal with your user credentials and go to " Provisioning Profiles ":

Add new profile:

Provide a name for the provisioning profile and select the correct product family.

For our example we choose the D-Series from the drop-down menu, and we create the provisioning profile for a innovaphone cloud PBX installation.

2. Adding the Outbound Proxy settings

1. To find the correct setting parameter use the search bar in the Settings section
2. Add the setting to your profile by simply clicking it 
3. Fill in "Edit identity" pop up window.
   1. Use index 1
   2. Fill inn Value field with Outbound proxy settings.
      In our case we have cloud version and we need to use TCP protocol "test.innovaphone.com ;transport=tcp"
      In local environment TCP is not mandatory and and we can skip (;transport=tcp) parameter.
      Outbound proxy can be domain name or IP address.
4. Click SAVE.

3. Configuring the PhoneLink app

Go to PhoneLink app in Innovaphone PBX. If you need help installing the app, please read this article.

Open the app and select the provisioning profile you want to use for your phones. Then click SAVE.

4. Registering new Snom phones

4.1 Registering new Desktop series Snom phones  SINGLE SIP account configuration (models D140/150, D3xx, D7xx and D8xx)

Step 1.
The registration and the assignment of new phones to users is done in the  Users Admin section of the innovaphone PBX.

Go to Users Admin

Create new user account.
a) User Name
b) Password
c) Extension
CONFIRM when done.
 

Step 2 "Register phones" wizard

Go to the " Register phones " tab and chose " New phone registrations "

Select the manufacturer Snom from the drop down menu and click NEXT.

Select the category "IP Phone" and click NEXT.

Select one or more users and fill in the MAC addresses of the phones you want to assign to the user(s).
Click NEXT and FINISH to complete the phone provisioning.

Step 3 "Users Admin" single account configuration.

In Users Admin we have possibility to configure single SIP account configuration in user details section.
Click + on Devices section and add Hardware Id with Snom Phone MAC address.
Hardware Id field is used as SIP account in innovaphone system.

IMPORTANT:
Confirming user configuration changes after adding MAC address will change Hardware Id field with added postfix idx1

4.2 Multi SIP account configuration (models D140/150, D3xx, D7xx and D8xx)

Step 1 The registration and the assignment of new phones to users is done in the  Users Admin section of the innovaphone PBX.

Repeat Step 1 from point 4.1.

Step 2 "Users Admin" single account configuration.

Go to Users Admin → Account configure SIP account configuration in user details section.
Click + on Devices section and add Hardware Id with Snom Phone MAC address.
Hardware Id field is used as SIP account in innovaphone system.

You can use the same MAC address to create additional SIP Account on Snom Device.
PhoneLink app will recognize that we want to create additional SIP identity on the device and will create new account with next postfix available.

Confirming user configuration changes after adding MAC address will change Hardware Id field with added postfix for example idx2.

Attention! By default, PhoneLink app is provisioning innovaphone PBX object (Devices->PBX→Objects) with Reverse Proxy and Media Relay option turned ON. If you need to change this configuration, you can do so here in the PBX Objects section.

5. Installing the phone

1. Unpack the Snom device and connect it to the LAN, or do a factory reset if it is already connected. The phone will boot up and send an auto-provision request to our SRAPS server.
2. The Snom phone will retrieve its configuration data stored on SRAPS and will register with the PBX.
3. The phone will appear listed in the Objects of the innovaphone PBX:

The successful registration can be verified in PBX > Registration:


Or directly on the Phone Display by the green icon.