| Reference | Description |
|---|
#MCP-1160 | SRTP call does not work for RTP forwarding |
#MCP-2012 | Wrong call state after multiple reject of same call |
#MCP-2068 | WebUI Date Format should not contain YY/MM/DD |
#MCP-2556 | M55/M58 in Secondary Base Click-To-Dial has no audio |
#MCP-2935 | M500 cannot make calls when stun server is set. |
#MCP-2969 | TLS registration failed with Metaswitch server |
#MCP-2972 | M500 - Out of Range Statistic determination - Not localized |
#MCP-3680 | Secondary Base with old RFPI after joined site |
#MCP-3774 | After renaming a Bluetooth device, and then power rebooting the M55/M58, the device name restores to its original name |
#MCP-3146 | M55/M58 outgoing call does not show Restricted Number CID |
#MCP-3183 | Added additional corner case protection for firmware upgrade process |
#MCP-3213 | M500: SIP INFO DTMF method is not recognized on 3CX |
#MCP-3255 | M55/M58 does not indicate out of range, and never comes back in range after base reboot |
#MCP-3646 | Corrected rare case of poor audio on one of the device connected to secondary base |
#MCP-3793 | M500 number of localized handsets is not matching |
#MCP-3795 | M500 installed handset firmware and installed deskset firmware are not matching |
#MCP-3802 | Need to reboot M500 to trigger SUOTA updating shared directory on M55/M58 if importing shared directory file while firmware upgrading is in progress |
#MCP-3810 | 1-way audio between secondary HSs - SRTP Enabled |
#MCP-3838 | M500: HS1 has no TX after local resumed the call - SRTP Enabled |
#MCP-3897 | Syslog error about namespace when performing factory reset |
#MCP-3939 | Localized handsets in Base status webpage is incorrect after deregister M55/M58 via PUI |
#MCP-3959 | M500 LINK LED incorrectly keeps flashing orange after a M55/M58 is registered. If another M55/M58 is registered or the base is rebooted, the LINK LED becomes steady green. |
#MCP-3966 | No disconnect indication when base is down |
#MCP-3980 | Abnormal call status after far end transfer a PARK call |
#MCP-4006 | M500 unresponsive upon making new call when maximum 8 calls has been reached (Happened once) |
#MCP-4020 | Number of connections decrease after handover |
#MCP-4027 | PFK LED stops flashing for held call after roaming to another base |
#MCP-4031 | SuotaManager doesn't stop broadcast while uploading new image to DCX. |
#MCP-4038 | Transfer call will stay on calling screen if the number is unreachable |
#MCP-4091 | Multicell: Blind transfer failure ringback not handled properly |
#MCP-4101 | Page receiver - suppress the disconnect tone when page ends |
#MCP-4133 | Duplicate parameters in a configuration file should be applied in order from top to bottom of the file. The last duplication should be the one that is applied. |
#MCP-4152 | After changing account type from Standard to Key Line Emulation, the M55/M58 cannot make an outgoing call |
#MCP-4207 | M55/M58 does not report SW version after SUOTA Upgrade. |
#MCP-4229 | M500: Cannot disable HTTPS Secure Browsing and port number via WebUI |
#MCP-4231 | Wrong RTP sent during re-invite mechanism |
#MCP-4252
#MCP-4324 | Improved DECT system broadcast channel |
#MCP-4257 | Some M55/M58 are out of range after base station reboot (Force the M55/M58 lock to the dedicated base station) |
#MCP-4271 | No audio after secondary M55/M58 call resume when connected to OpenSIPS |
#MCP-4273 | M55/M58: On the Directory > LDAP > Search page, the search wildcard * fails to return all the results |
#MCP-4275 | Show M55/M58 local date/time if base does not send/sync date/time to M55/M58 |
#MCP-4276 | M55/M58 does not auto-answer Page ALL |
#MCP-4279 | Far end emits big white noise after handover from Secondary to Primary |
#MCP-4281 | The entire call dropped if the barged-in M55/M58 hangs up |
#MCP-4291 | PFK cannot barge-in to another active call during active call |
#MCP-4296 | Unable to dial out via Speed dial list on transfer/conference dialer |
#MCP-4299 | During conference press "END" softkey cannot end the call |
#MCP-4303 | Incorrect soft key layout in Bluetooth device list |
#MCP-4306 | Keytone enabled during active call. No keytone should be heard during calling. |
#MCP-4307 | Do not show handset’s/deskset's own active call in the call list |
#MCP-4308 | Transfer call list should not show entry with different account |
#MCP-4315 | M55/M58 turn on LCD Backlight and All LED for 5 seconds every time M55/M58 reboots |
#MCP-4317 | No audio after resume the same call twice between bases |
#MCP-4320 | Abnormal PFK status after conferencing with different line |
#MCP-4321 | Incorrect PFK state if there is an incoming call in outgoing calling state |
#MCP-4326 | Primary change WebUI language but Secondary does not take effect |
#MCP-4327 | IPv6: DECT Radio does not turn on Secondary |
#MCP-4329 | BCSP Host API Memory Leak |
#MCP-4335 | No softkey on inbound call screen after Transfer |
#MCP-4339 | Abnormal call screen when blind transfer a hold call |
#MCP-4342 | Fail to establish call for particular M55/M58 |
#MCP-4346 | Invalid transfer action after answering incoming call during transfer |
#MCP-4347 | M55/M58 release call if inbound and outbound call at the same time (call collision) |
#MCP-4351 | IPv6 air sync fail. In the base status webpage, the air sync status is showing as unsync when the base is configured in IPv6. |
#MCP-4354 | Speed dial list cannot scroll down to the last item |
#MCP-4355 | Outbound call fails with RingCentrail when TLS is enabled |
#MCP-4356 | WebUI locked up if power down M55, then keep refreshing cordless status webpage |
#MCP-4358 | Correct an erroneous tone that may get generated on the device when ring volume is turned off during an incoming call |
#MCP-4365 | Fail to deliver updated call status to M55/M58 if more than 4 incoming calls arrive at the same time. |
#MCP-4366 | Call ID does not change after transfer |
#MCP-4395 | Duplicate tags in XML config causes phone to crash |
#MCP-4396 | M500 (Realtek RTL8363NB) : PC port VLAN tagging not working on bootup |
#MCP-4399 | Fail to Replicate Record Created by Manual Registration |
#MCP-4402 | Voicemail hardkey does not dial out on account 9 and up |
#MCP-4404 | Pressing hash key will trigger manual registration on "register via" menu |
#MCP-4406 | Local directory contact and speed dial should have 16 dial line |
#MCP-4411 | Registering screen pop up for a second after canceling manual registration |
#MCP-4412 | M55 cannot completely go back to Idle and end call, when put on cradle |
#MCP-4427 | Incorrect screen displayed when inbound call right after register |
#MCP-4436 | Cannot show M55/M58 name, if registered M55/M58 + Group > 48 |
#MCP-4437 | LCD Backlight cannot turn off, after timeout from Manual Registration |
#MCP-4438 | No function on call history "Save" softkey |
#MCP-4439 | Intercom hard key should be disabled during intercom or paging call |
#MCP-4441 | Unexpected center key action on manual registration message |
#MCP-4444 | Bluetooth pairing screen should not be able to dismiss by center key |
#MCP-4459 | "Call Forward No Answer" PFK label is clipped |
#MCP-4469
#MCP-4585 | Improve robustness of Wideband handover |
#MCP-4475 | M500 : LLDP-MED policy change cannot apply without unplug/replug |
#MCP-4477 | trigger provisioning on secondary when primary receives a check-sync NOTIFY |
#MCP-4485 | Using Wrong Codec |
#MCP-4486 | One M55/M58 Failed to update firmware version to Base |
#MCP-4547 | During paging call, M55/M58 answers the call waiting call, M55/M58 doesn't drop the paging call |
#MCP-4553 | M55/M58 cannot be paged when it is on Paging menu |
#MCP-4562 | M55 Miss call option page empty |
#MCP-4566 | During Call transfer, M55/M58 active call screen frozen, until call release |
#MCP-4567 | M55/M58 On Secondary fail to update shared directory |
#MCP-4573 | Sometimes calls would be dropped after handover |
#MCP-4578 | CallSlotModel - Attended transfer fail at secondary base |
#MCP-4583 | Missing device MAC address info on the syslog message |
#MCP-4584 | Early attended transfer failure not handled properly |
#MCP-4588 | Improve call release message handling |
#MCP-4601 | Caller name duplicated from caller number |
#MCP-4603 | Predial Fail to dial, Post-dial normal |
#MCP-4607 | After import config, WebUI was blank |
#MCP-4612 | 2-way audio turns bad after a min when the Secondary M55/M58 is on the call, resume after another 1 min. |
#MCP-4622 | After attended transfer fail, no transfer failed splash screen |
#MCP-4634 | LCD backlight turn off during Hold Call state |
#MCP-4640 | Removed Network Conference configuration from WebUI |
#MCP-4648 | M55/M58 cannot receive incoming ring before making outbound call |
#MCP-4655 | Correct manual account type changes not getting applied properly |
#MCP-4661 | Correct error handling when DECT location registration is unsuccessful |
#MCP-4673 | Correct logging message when paging occurs |
#MCP-4684 | DECT M55/M58 - Forever Search for Base |
#MCP-4688 | M55/M58 cannot send Firmware version, if call started |
#MCP-4694 | Does not use PAI/RPID for inbound call |
#MCP-4710 | Incorrect Reboot Counter |
#MCP-4712 | Correct race condition that may cause incorrect device configuration when devices are powered up |
#MCP-4714 | M500: cannot open the wireshark data from webUI system log pcap |
#MCP-4719 | M55/M58 memory leak found when access call list during active call |
#MCP-4736 | Correct out of range status from not being reported correctly in some circumstances |
#MCP-4767 | Dect Statistic failed to pull on some handsets/desksets |
#MCP-4768 | Correct localization information when performing several handover in succession |
#MCP-4781 | M55/M58 - Align Active Call Top Row Icons with Idle screen |
#MCP-4787 | Answering call at primary when it has already been answered at secondary |
#MCP-4799 | Call waiting call was disappear - Concurrent ringing (INT) |
#MCP-4800 | M500 call failure with opus/ilbc codecs |
#MCP-4801 | Correct simultaneous off-hook with multiple devices from being reported correctly |
#MCP-4804 | Fail To Answer Call Concurrently - M55/M58 frozen in "Incoming Call" |
#MCP-4845 | M500 Dual base Localized list corruption as a result of M55/M58 reboot |
#MCP-4849 | Can't perform feature access code when the code include "#" in multicell |
. On the M58, press 
.
is displayed on the screen.