Published Date: 07 Aug 2024 




To install a new firmware version on a base station and/or handset, please follow the instructions provided in the firmware update guide.


Known Bug: Peer to Peer mode cannot be used in the version. Use Multicast or LAN Sync (Multicast) instead!

Known limitation: M65 utf-8 text does not show correctly. Hardware is not supporting utf-8, please downgrade to pre 7xx versions.

Please read the  release notes carefully before upgrading.


WARNING - Please be sure to read this Information!



Upgrade handsets first to  avoid unreadable display text. M65 does not support utf-8!

M5 repeaters not supported. Use M6 repeaters with V730B100.

Downgrade to 530B10 is possible on M900, but will reset all  "User" and "Engineer" profiles and passwords

After upgrading from <=530B10, the base asks to set new passwords for "Engineer" and "User". Make sure you either provision the passwords or you change them immediately !!! A strict password policy will be applied.

This version has two additional user profiles introduced after 530B10. ("User" & "Engineer")

  • The base will ask for new passwords for these profiles after the upgrade. To avoid entering new passwords by hand you shall provision secure default passwords of your choice instead. Make sure you are choosing a strong password.

     Users and Passwords in the configuration to change:
     

    <http_user>admin</http_user>
<!-- <http_pass>**********</http_pass> -->
<http_basic_user>User</http_basic_user>
<!-- <http_basic_pass>**********</http_basic_pass> -->
<http_engineer_user>Engineer</http_engineer_user>
<!-- <http_engineer_pass>**********</http_engineer_pass> -->


Please reboot the base station(s) (chain reboot in multi cells) before triggering the upgrade, to free up some memory and avoid any issues.



How to Update a DECT Device

Base Binaries download

Handset Binaries download